|
|
|
Are you interested in purchasing a Jump Ringer High Production
or Standard? Please use the links below to go right to the cart. |
|
Code |
Image |
Price |
|
Description |
|
|
|
|
|
|
TJR-0400
|
 |
$322.00 |
|
Jump Ringer System
- High Production |
|
|
|
|
|
|
TJR-0401
|
 |
$279.00 |
|
Jump Ringer Standard
|
|
|
|
|
|
|
TJR-0407
|
 |
$4.15 |
|
Cut Lube |
|
|
|
|
|
|
Jump Ringer System - Standard |
The Standard Jump Ringer System is the most economical choice
in making round jump rings. This system comes with three mandrels
that are 3 ¾ inches long (diameters: .94”, .0141”,
and .234”). From top to bottom, the system includes a coiled
holder, blade arbor with blade and blade guide, a winder, 3 mandrels
and a Jacob’s key. |
|
|
|
Standard
Jump Ringer System |
|
|
|
|
Both the Standard and High Production Jump Ringer Systems require
a motor to operate them. The manufacturer is specific about what
motor should be used to power the equipment. He recommends the
Foredom Flex shaft |
|
|
|
Foredom
Flex Shaft |
|
|
|
|
To keep the motor cool and to extend the life of your blade,
use a stick lubricant such as Cut Lube. The stick is applied
to the coil before cutting. Instruction are provided with the
Jump Ringer System. |
|
|
|
Cut
Lube |
|
|
|
|
Although the Standard Jump Ringer System comes with 3 mandrels,
you may want to consider purchasing a set of 16 round mandrels.
You will thus have easy access to making a large variety of jump
ring diameters. |
|
|
|
Short
Mandrels |
|
|
|
|
|
|
The following pictures are meant to give you a better idea what
Standard Jump Ring System looks like in operation. When you purchase
your system, you will be provided written instructions and be
given a contact for tech support just in case you have questions. |
|
|
|
Making the Coil on the Winder |
|
|
|
|
The coil is resting in the coil holder ready to
be cut. A plate with a vertical grove covers the coil holder. |
|
|
|
Blade Arbor with Blade and Blade Guide
Instructions in your kit will illustrate how to assemble
these parts. You will also be instructed in how to cut the rings. |
|
|
|
|
|
|
|
|
Frequently Asked
Questions |
|
Back to High Production
Jump Ringer |
|
Back to Introduction |
|
|
